 |
| LIGHT DUTY LIFTS - REVOLUTION |
|
|
|
|
View the RFP9 manual
RFP9-
Features:
- Multi-position locks allow runways to be level at any lock position
- Single point lock release
- 9,000 lbs. capacity makes the RFP9 perfect for home use
- ALI Certified
- INCLUDES Steel approach ramps
- INCLUDES Caster kit
- INCLUDES One jack tray
- INCLUDES Four drip trays
Specifications:
- Capacity 9,000 lbs.
- Rise 85"
- Overall Length w/ Approach Ramps 218-1/2"
- Overall Length w/out Approach Ramps 193"
- Approach Ramps 31"
- Overall Width w/ Motor 133"
- Overall Width w/out Motor 121"
- Runway Tread Width 20"
- Runway Length 188"
- Runway Height 5"
- Width Between Runway Treads 39-1/4"
- Outside Runway to Outside Runway 79-1/4"
- Clearance Under Runways 80"
- Clearance Between Columns 109-1/2"
- Drive Through Width 97-1/2"
- Height of Columns 97"
- Power Unit 110 Volt (220 Volt Optional)
- Shipping Weight 2,350 lbs.
|
| |
|
|
View the RTP9 manual
RTP9-
Features:
- 9,000 lbs. capacity lift for facilities with low ceilings
- Dual hydraulic cylinders with chains
- Carriage latch system engages every 3"
- Secondary lock system includes a spring actuated slack
- chain locking device
- Truck adapters included
- ALI Certified
Specifications:
- Capacity 9,000 lbs.
- Rise w/ Extensions 80-1/2"
- Rise w/out Extensions 72"
- Overall Height 111-1/4"
- Overall Width 138-1/2"
- Drive Through Clearance 97-1/4"
- Width Inside Columns 111"
- Arm Reach (Min/Max) 30" / 46-1/4"
- Min. Adapter Height 3-1/2"
- Driver-Over Height 1-1/2"
- Voltage/Amps 208/230, 20 Amps
- Motor 2 HP
- Min. Ceiling Height 113" (9'-5")
|
| |
|
|
View the RTP10 manual
RTP10-
Features:
- Overhead padded switch bar to avoid vehicle damage from being
- raised too high
- 3-Stage front arm design enables you to position vehicle doors in front of or behind columns to avoid door damage
- Top mounted pull design hydraulic cylinder. The piston rod is protected behind the carriage to prevent damage
- Overhead cable equalization
- Spring operated arm restraints, disengage at floor level
- Single point lock release
- Two full-stroke cylinders with overhead cable for equalization
- Large rubber-padded swivel truck adapters with extra height extensions are standard.
- ALI Certified
Specifications:
- Capacity 10,000 lbs.
- Rise 77"
- Overall Height 143-1/8"
- Overall Width 131" (optional 137")
- Drive Through Clearance 97" (optional 103")
- Overhead Switch Height 136-1/4"
- Front Arm Reach (Min/Max) 23" / 44-1/2"
- Rear Arm Reach (Min/Max) 38-7/8" / 58"
- Min. Adapter Height 3-5/8" / 10"
- Width Inside Columns 109-3/4" (optional 115-3/4")
- Voltage/Amps 208/230, 20 Amps
- Motor / Phase 2 HP / 2 HP / 10*
- Min. Ceiling Height 144"
|
| |
|
|
